Brick, block and stone masonry in Racine, Kenosha and Milwaukee CountyBrick, block and stone masonry in Racine
M.O.E Masonry
Cut bluestone patio with stone seat walls and an iron dining set beside a lawn, flagstone patio cost
Call (262) 744-4688 Request a Quote

How Much Does a Flagstone Patio Cost in Wisconsin?

National cost guides put a flagstone patio at about $15 to $32 per square foot installed, laid dry. For a typical patio of 200 to 400 square feet, that comes to $3,000 to $12,800. Set the stone in mortar or on concrete, and the range climbs to $20 to $45 per square foot.

For a Wisconsin check, one guide lists $3,556 as the average cost of a 200-square-foot flagstone patio in Milwaukee. That works out to about $18 a square foot. These are market numbers, not our price list. For stone patios and walkways around Racine, the real number comes from your yard and the stone you pick.

What does a flagstone patio cost per square foot?

The price per square foot depends on how the stone is set. These ranges come from one national cost guide and include materials and labor.

Install methodPer square foot, installedTypical total, 200 to 400 sq ft
Dry-laid on gravel and sand$15 to $32$3,000 to $12,800
Mortar-set$20 to $42$4,000 to $16,800
Concrete-set$23 to $45$4,600 to $18,000

Dry-laid stone sits on a gravel and sand base, with sand swept into the joints. It has the lowest labor cost of the three methods.

Mortar-set stone is bedded in mortar on an existing concrete slab or a compacted base. Then the joints are filled.

Concrete-set stone goes down on a 4-inch concrete slab. The guide calls it the most labor-intensive method, with the strongest bond.

Rain cannot soak through a mortared surface, so it pools fast. The guide says mortar-set and concrete-set patios need good drainage around them.

A second national guide puts flagstone patio installation at $15 to $30 per square foot. It says most jobs land between $750 and $8,400, depending on square footage.

How much does a flagstone patio cost by size?

The bigger the patio, the more it costs. This table uses the first guide’s dry-laid figures.

Patio sizeSquare feetDry-laid cost
10 by 10 feet100$1,500 to $3,200
12 by 12 feet144$2,150 to $4,600
12 by 15 feet180$2,700 to $5,750
10 by 20 feet200$3,000 to $6,400
15 by 20 feet300$4,500 to $9,600
20 by 20 feet400$6,000 to $12,800

The Milwaukee average of $3,556 sits inside the 200-square-foot row. The second guide puts a 300-square-foot patio at $4,500 to $9,000. Mortar-set or concrete-set stone moves every row higher.

The rate shifts with size too. One guide says the price per square foot drops on bigger jobs and rises a little on small ones. Minimum job fees cause that.

How much of the cost is stone, and how much is labor?

In the first guide’s breakdown, the flagstone itself runs $6 to $15 per square foot. Installation labor adds $9 to $17. Labor makes up 60 to 70 percent of the total.

The stone you pick moves the material cost. In the same guide, a bluestone patio runs $15 to $31 per square foot installed. Limestone runs $16 to $32.

Thickness counts too. The second guide says patio flagstone should be at least 1.5 inches thick. Stone 2 to 3 inches thick breaks less, but it costs more per square foot.

Southeast Wisconsin has its own stone. The Encyclopedia of Milwaukee says the stone known locally as Lannon stone remains a primary building and landscape material here. Quarries, active and abandoned, sit throughout southeastern Wisconsin. One national guide notes that stone costs more the farther it ships from where it forms.

What drives the price of a stone patio in southeast Wisconsin?

The base and drainage. Frost heave comes from water freezing in the soil. A base that drains keeps water from sitting under the stone. One guide prices a compacted gravel base, 4 to 10 inches deep, at $2 to $5 per square foot. It says most flagstone needs that base, depending on the ground.

Access. One guide puts a pallet of flagstone at 1.5 to 2.25 tons or more. Every pallet has to get from the truck to the back yard. Another guide lists easy access for the installers as a way to save.

Steps and landings. A patio below the back door needs steps to reach it. One guide prices stone steps at $300 to $900 per step. Another says stone steps add $1,400 to $5,500 to a patio job on average. Stone steps and landings fall under our stone masonry work.

Taking out an old patio. Tearing out an old stone patio runs $1 to $5 per square foot in one guide. Breaking out an old concrete slab runs $3 to $8 per square foot. Another guide puts demolition at $550 to $1,700.

Curves and cutting. One guide says a half-circle patio or curved border costs more in labor. Many stones need precise cutting to fit the shape.

What does a flagstone walkway cost?

One national guide puts a stone walkway at $16 to $35 per square foot. A walk 3 feet wide and 20 feet long covers 60 square feet. At that rate, it runs about $960 to $2,100.

Steps where the walk climbs to the door add to that. On a sloped yard, a walk or patio may need a retaining wall beside it. The wall adds its own cost.

Is flagstone more expensive than pavers or poured concrete?

Yes, in the national guides. Here is how the first guide prices each patio type.

Patio typeCost per square foot, installed
Plain poured concrete$5 to $15
Stamped concrete$8 to $19
Concrete pavers$10 to $17
Flagstone, dry-laid$15 to $32
Flagstone, mortar-set or concrete-set$20 to $45

The same guide says the stone alone costs $2 to $9 more per square foot than concrete pavers. Shipping it from quarries explains the gap. Labor costs 50 to 55 percent more than for pavers, especially for irregular shapes.

Pavers and stamped concrete are a hardscape or concrete company’s work. We build with natural stone.

Do you need a permit for a flagstone patio in Wisconsin?

Wisconsin’s dwelling code sets a frost rule for landings and stoops (SPS 321.16). Their footings go at least 48 inches below grade, or below the frost line if that is deeper. The rule names landings and stoops. It does not name patios.

Patio permits are a local question. The City of Milwaukee’s permit guide, for one, lists a patio as needing no permit. Your village or city may also have zoning rules, like how close a patio can sit to the lot line. Ask the building inspector’s office before work starts, and we point you there.

How do you get a real number for your patio?

National ranges get you close. The real number comes from your yard: the size, the stone, the base and the access.

M.O.E Masonry is a masonry contractor based in Mount Pleasant on the south side of Racine. We look at the job, or you send photos, and we put the quote in writing. See how we build stone patios and walkways, or call or text (262) 744-4688.

Frequently asked questions

How much does a flagstone patio cost per square foot?
National cost guides put a flagstone patio at about $15 to $32 per square foot installed, laid dry. Mortar-set stone runs $20 to $42, and concrete-set stone runs $23 to $45. Thicker stone and curved shapes push the price up.
How much does a 12 by 12 flagstone patio cost?
A 12-by-12 patio covers 144 square feet. One national guide puts it at $2,150 to $4,600, laid dry. A second guide puts it at $2,200 to $4,300.
How much does a bluestone patio cost?
One national guide puts a bluestone patio at $15 to $31 per square foot installed. The bluestone alone runs $6 to $14 per square foot in that guide. Thicker stone costs more per square foot.
Is flagstone more expensive than pavers?
Yes, in national cost guides. Concrete pavers run $10 to $17 per square foot installed, against $15 to $32 for dry-laid flagstone. Paver patios are a hardscape company's work, and we build with natural stone.
How long does a flagstone patio last?
One national guide says 10 to 50 years, depending on the installation quality and location. Frost heave comes from water freezing in the soil. That is why the base under the stone has to drain.
How thick should flagstone be for a patio?
One national guide says patio flagstone should be at least 1.5 inches thick. Thinner stone can crack under patio furniture and foot traffic. Stone 2 to 3 inches thick breaks less, but it costs more per square foot.
Is this what M.O.E Masonry charges?
No. These are market numbers from national cost guides, not our price list. We look at the job, or you send photos, and we put the quote in writing. Call or text (262) 744-4688.
Request a Quote

Get In Touch With M.O.E Masonry

Tell us about the job and where it is, and send photos if you have them. Call or text (262) 744-4688, or use the form, and we will get back to you.

  • Call or text (262) 744-4688
  • Mount Pleasant, WI · serving Racine County, Kenosha County and the south side of Milwaukee County
  • Written quotes · brick, block and stone, new work and repairs

Request a Quote

Tell us about the wall, chimney, foundation or steps and where the job is. We look at it and put the quote in writing.

Call (262) 744-4688