Brick, block and stone masonry in Racine, Kenosha and Milwaukee CountyBrick, block and stone masonry in Racine
M.O.E Masonry
Stair-step crack through the mortar joints of a red brick house wall below the eave, brick repair
Our Services

Brick Repair in Racine, WI

Brick Repair · Racine, WI

Damaged brick cut out, matched brick set back in

Brick repair is the fix for the brick itself. The face may be flaking off, which masons call spalling, or a brick may be cracked clean through. M.O.E Masonry cuts out damaged brick and sets new brick matched to the wall in size, color and texture. We also repair brick facades and veneer, and rebuild damaged sections of wall once the cause is known.

When only the mortar has worn, tuckpointing is the repair, and chimneys fall under chimney repair. We are based in Mount Pleasant on the south side of Racine and work about 40 miles around it. That covers Racine County, Kenosha County and the south side of Milwaukee County, up to Milwaukee itself. Call or text (262) 744-4688, and we will look at the wall or photos, then put the quote in writing.

What We Handle

  • Spalled, cracked and broken brick cut out and replaced
  • Replacement brick matched to the wall in size, color and texture
  • Brick facade repair on house fronts and older brick buildings
  • Damaged or bulging sections of brick wall rebuilt once the cause is known
  • Brick veneer repair: loose brick, missing ties and clogged weeps
  • Brick columns, pillars, entry walls, mailboxes and planters
  • Mortar matched to the old and no stronger than it
  • A written quote after we look at the wall or your photos

Request a Brick Repair Quote

Tell us about the wall, chimney, foundation or steps and where the job is. We look at it and put the quote in writing.

Spalling brick repair: how brick replacement works

Brick that gets too wet can crack or spall under repeated freeze-thaw cycles, per a Brick Industry Association note. Once a brick is broken or heavily spalled, water gets in through it, another of its notes says. Replacing the damaged brick may be necessary at that point.

We break up the damaged brick and cut out the old mortar without harming the bricks around it. The opening is cleaned and dampened, and the new brick is buttered, centered and pressed into place. When the mortar is thumbprint hard, the joints are tooled to match the old ones. The mortar is matched to the old, since the wrong mortar can spall and crack the brick around a repair.

Cracked brick repair: which cracks need an engineer first?

One cracked brick is a simple brick wall repair: cut it out and set a new one. But a Brick Industry Association note warns that structural problems can sometimes look like routine repairs. Its signs for a professional engineer's look include cracks wider than 0.075 inch, about 2 millimeters.

Cracks through several bricks are on the list, and so are stepped or diagonal cracks and widespread spalling. A wall that bulges or leans out of line counts too, as does heavy rust on a steel lintel. The engineer finds the cause and recommends the repair. Rusted lintels, brick steps, sills and parapets fall under our masonry repair work.

Brick reconstruction comes after that. If water is the problem, the Brick Industry Association says to find and fix the source first. Then we take the damaged section down to sound brick and rebuild it to match the wall.

Brick facade repair and brick matching in Milwaukee and Racine

Census estimates show about a third of the homes in both Milwaukee and Racine were built in 1939 or earlier. Milwaukee's hometown brick is Cream City brick, the soft, golden-yellow brick its 19th-century brickmakers fired from local clay. Its manufacture ended in the 1920s, when harder red brick took over. Racine has cream brick too, with a National Register district of cream brick workers' cottages listed in 1994.

For brick facade repair, the Brick Industry Association says replacement brick must match the old in color, texture and size. Finding that brick may take considerable effort. It calls for a sample panel to check the match against the old wall. On soft old brick, the new mortar should also be no stronger than the old. A whole new front is a different job, covered on our brick and stone facades page.

With Cream City brick out of production, a match is salvaged brick or new brick close in color and size. Salvaged brick can look right, but the association says walls of it are generally weaker and less durable. Hard and soft brick get mixed when old walls come down, and telling them apart is close to impossible. Matching brick on a new addition is part of our brick masonry work.

Spalled and crumbling brick at the base of an old wall where the coating has broken away, brick repair Crumbling brick at the base of a red brick porch column beside concrete steps, brick repair

Ready to get started?

Call or text for a written quote anywhere across Racine County, Kenosha County and the south side of Milwaukee County.

(262) 744-4688
How We Work

How a Job With M.O.E Masonry Runs

From the first call or text to the finished work, here is how it goes.

1

Call or text

Call or text (262) 744-4688 and tell us about the job. Photos help, so send a few if you can.

2

We look at the job

We come out and look at the masonry and the mortar joints. Good photos can stand in for that first look.

3

The written quote

You get the quote in writing, with the work spelled out. Once you say yes, we set a start date.

4

The work

The brick, block or stone is delivered to the site, and scaffolding goes up where the height calls for it. Then we lay the new masonry or make the repair.

5

The finish

We take a final look at the work with you. The site is cleaned up before we leave.

FAQ

Brick Repair Questions, Answered

Common questions about brick repair across Racine County, Kenosha County and the south side of Milwaukee County. If yours is not here, call or text and ask.

Call (262) 744-4688

How much does brick repair cost?
The price turns on how many bricks need replacing and how hard your brick is to match. Height and scaffolding add to it, and a rebuilt section takes more work. We put the quote in writing after we look at the wall or your photos. Our guide to what brick repair costs has market ranges from national cost guides.
Can you replace just a few bricks?
Yes. Small repairs are part of our work. Spot brick replacement takes out only the damaged bricks and leaves the sound wall in place.
Can my old bricks be reused in the repair?
Sometimes, if they come out whole and sound. Under Wisconsin's dwelling code, reused masonry units must have no defects that weaken them or make them hard to lay. Brick salvaged from a chimney is not recommended for reuse, since it may hold oils or tar.
Can you fix brick veneer that is loose or pulling away?
Yes. Veneer that bulges or pulls away is out-of-plane movement, a sign for an engineer to check first. Damaged or missing ties get replaced with remedial ties, most set through small holes, usually in a mortar joint. Clogged weeps are opened with care so the air space behind the brick can drain again.
Do you repair brick columns, pillars and mailboxes?
Yes, along with brick entry walls and planters. Damaged brick is cut out and replaced, and loose courses at the top are taken down and relaid. If a column or pillar leans, we find out why before the brick goes back up.
Can brick repair be done in winter?
Wisconsin's dwelling code requires cold-weather procedures for masonry work below 40 degrees F. Around Racine, that makes spring through fall the season for brick repair. Winter work is scheduled by the weather.
More From M.O.E Masonry

Work That Pairs With Brick Repair

Red brick front steps, landing and walk with black iron railings at a brick house, masonry repair

Masonry Repair

Spalled brick, rusted lintels, loose steps and failed wall sections repaired and matched to the wall. Historic brick buildings and churches restored with matching brick and mortar.

Learn More
Hand pressing new mortar into brick joints with a tuck pointer, tuckpointing

Tuckpointing

We grind out crumbling mortar joints and pack in new mortar matched to the old. We tuckpoint brick, block and stone walls, chimneys, foundations and steps around Racine.

Learn More
Close view of new brick veneer courses with tooled mortar joints beside a flashed window opening, brick masonry

Brick Masonry

We lay brick veneer on new houses, additions, garages and commercial buildings. We also build brick steps, stoops, patios, columns and mailboxes.

Learn More
Why Choose M.O.E Masonry

Brick, Block and Stone Masonry Around Racine

Brick, block and stone

We lay all three, for new work and for repairs. You deal with one masonry company, whatever the wall is made of.

Mortar and brick matched

A repair should look like part of the wall. We match the mortar to the old joints and pick brick to match the wall around it.

A written quote after we look

We look at the job before we price it, in person or through your photos. The quote comes to you in writing before any work starts.

Based in Mount Pleasant

Mount Pleasant sits on the south side of Racine, in Racine County. From there, we work in Racine, Kenosha and the south side of Milwaukee County.

Guides and Resources

Brick Repair Guides

Request a Quote

Get In Touch With M.O.E Masonry

Tell us about the job and where it is, and send photos if you have them. Call or text (262) 744-4688, or use the form, and we will get back to you.

  • Call or text (262) 744-4688
  • Mount Pleasant, WI · serving Racine County, Kenosha County and the south side of Milwaukee County
  • Written quotes · brick, block and stone, new work and repairs

Request a Quote

Tell us about the wall, chimney, foundation or steps and where the job is. We look at it and put the quote in writing.

Call (262) 744-4688