Brick, block and stone masonry in Racine, Kenosha and Milwaukee CountyBrick, block and stone masonry in Racine
M.O.E Masonry
Stair-step cracks running through an old red brick wall, brick repair cost
Call (262) 744-4688 Request a Quote

How Much Does Brick Repair Cost in Wisconsin?

National cost guides put most brick wall repairs at $804 to $2,640. One guide puts the 2026 national average at $1,718. Crack repairs of 10 or fewer bricks run $500 or less in that guide. Spalling that forces a rebuild of large sections can reach $20,000.

These are market numbers, not our price list. For brick repair around Racine, the price turns on how many bricks come out and how high they sit. The match to your old brick and the cause of the damage move it too.

What does brick repair cost by job?

Here is what national cost guides list for common brick repairs. Spalling is the face of the brick flaking or popping off.

Brick repair jobMarket rangeWhat moves the price
Crack repair, 10 or fewer bricks$500 or lessHow many bricks, and the match
Brick wall repair, per square foot$20 to $40 per sq ftHow far the damage goes
Brick veneer repair, thin brick$11 to $24 per sq ftLoose, cracked or missing pieces
Brick veneer repair, solid face brick$20 to $40 per sq ftSize, color and texture to match
Spalling brick, a few sections$900 to $1,200 on averageHow many sections need new brick
Spalling brick, large sections rebuiltUp to $20,000How much wall comes down
Bowing brick wall, per 100 sq ft$2,000 to $6,500, or $7,500 to $40,000The cause, found first
Full brick wall restoration$5,000 to $20,000 or moreWall size and height
Brick mailbox repair$150 to $300, up to $750A small fix or a bigger one
Brick mailbox replacement$900 to $1,800 on averageSize and the brick
Brick steps, repair$300 to $750 per stepA masonry repair job
Lintel over a window, replaced$500 to $700A masonry repair job

The guides that price bowing walls disagree by a wide margin. Either way, a bowing wall goes to a structural engineer first. The guides we read give no separate figure for brick columns or pillars. The same things move that price: how many bricks come out, and whether it gets rebuilt.

Brick steps and steel lintels over windows fall under masonry repair, and their rows are here to compare. If only the mortar is worn, that is tuckpointing, and our post on tuckpointing cost has those numbers. Chimney brick has its own ranges in our post on chimney repair cost.

Why does a small brick repair cost so much per brick?

Labor is the big cost. One guide calls labor the dominant cost driver in brick wall repair. Another puts standard red brick at about $0.40 each.

Each brick takes several steps, and a Brick Industry Association technical note lays them out. The damaged brick is broken to help remove it. Then the old mortar is cut out without damaging the bricks around it.

The new brick is buttered with mortar, centered in the opening and pressed into position. Once the mortar is thumbprint hard, the joints are tooled to match the original profile.

Small jobs also carry a minimum. Some masons set a minimum fee, usually $200 to $400. On a very small repair, that minimum can set the price.

What drives the price in Racine, Kenosha and Milwaukee County?

Height and scaffolding. One guide adds 10 to 25 percent for hard-to-reach repairs that may need scaffolding. Another says prices rise 20 to 40 percent on two-story buildings. A third says labor can climb 50 to 100 percent once the work sits above 10 feet.

The age of the house. About a third of the City of Racine’s 34,848 homes were built in 1939 or earlier, per the Census. In the City of Milwaukee, 88,129 of 259,101 homes date to 1939 or earlier. On a house that old, the new brick has to match brick made long ago.

Matching old brick. Milwaukee’s 19th-century brickmakers fired local clay into soft golden-yellow brick, known as Cream City brick. Its manufacture ended in the 1920s, says the Encyclopedia of Milwaukee. So a match today comes from salvaged brick or a new brick picked to look close.

Salvaged brick takes care. A Brick Industry Association technical note says walls of salvaged brick are weaker in general. They are also less durable than walls of new brick. The same note quotes a code that does not recommend reusing brick salvaged from chimneys.

For new brick, Technical Note 46 says to use mock-ups or sample panels to judge the match. Brick prices show the gap too. The guide that puts standard brick at $0.40 says rare or antique brick can run up to $10 each.

Mortar matched to the old. The new brick sits in new mortar, and that mortar has to suit the old wall. A Brick Industry Association note says repointing mortar should be no stronger than the existing mortar. Stronger mortar stresses old brick and can make it spall.

One guide prices a mortar color-match test at $150 to $325. The same guide puts a mortar ingredient analysis at $300 to $500.

The cause of the damage. A Brick Industry Association note covers brick that takes on too much water. Under repeated freeze-thaw cycling, it can crack, craze, spall or disintegrate. Wisconsin winters freeze and thaw wet brick again and again.

If the water keeps coming, the new brick can fail the same way. So the source of the water gets found and fixed too.

An engineer’s look, when it comes first. Technical Note 46 lists conditions that warrant an investigation by a professional engineer. They include wide cracks, cracks through several bricks and cracks following a stepped or diagonal pattern. Widespread spalling, rust on lintels or shelf angles and walls moving out of plane are on the list too.

One national guide puts a structural engineer’s home inspection at $350 to $900. The report can take 1 to 10 days. That cost comes before the repair, and the findings shape the written quote.

Should you repair the brick or replace the whole wall?

Brick that is broken or heavily spalled lets moisture in, says Technical Note 46. Replacing those damaged units may be necessary. The sound brick around them stays in place, so spot repairs sit at the low end of the table.

Bigger damage costs more. One guide puts a full brick wall restoration at $5,000 to $20,000 or more. When spalling is widespread, Technical Note 46 calls for an engineer’s look first. The engineer’s findings help decide between spot repair and a rebuild.

Do you need a permit to repair brick in Wisconsin?

It depends on your town and the job. One national guide says most local governments skip the permit for repairs to existing work with similar materials. Rules vary by city and village. The building inspector’s office in your town answers that, and we point you there.

How do you get a real number for your brick?

National ranges get you close. The real number comes from your wall: the bricks, the height, the match and the cause.

M.O.E Masonry is a masonry contractor based in Mount Pleasant on the south side of Racine. We work about 40 miles around Racine, in Racine County, Kenosha County and the south side of Milwaukee County. We look at the job, or you send photos, and we put the quote in writing.

See how we replace and match brick, or call or text (262) 744-4688.

Frequently asked questions

How much does it cost to replace a few bricks?
One national cost guide puts crack repairs of 10 or fewer bricks at $500 or less. Some masons also set a minimum fee, usually $200 to $400. On a very small repair, that minimum can set the price.
How much does brick repair cost per square foot?
One national guide says masons often charge $20 to $40 per square foot for brick wall repair. Another puts brick veneer repair at $11 to $24 per square foot for loose, cracked or missing brick. Height and the match move the rate.
How much does it cost to fix spalling brick?
One national guide puts spalling repair at $900 to $1,200 on average when only a few sections need work. It can run as high as $20,000 when large sections of a wall need a rebuild. Wet brick can spall under repeated freeze-thaw cycling, so the water source gets fixed too.
Can old Cream City brick be matched?
Cream City brick manufacture ended in the 1920s, says the Encyclopedia of Milwaukee. A match comes from salvaged brick or a new brick picked for size, color and texture. A Brick Industry Association note says to use mock-ups or sample panels to judge a new brick's match.
When does cracked brick need a structural engineer?
A Brick Industry Association technical note lists conditions that warrant an engineer's investigation. They include cracks through several bricks, stepped or diagonal cracks, widespread spalling and walls moving out of plane. One national guide puts a structural engineer's home inspection at $350 to $900.
Does brick repair cost more on a two-story house?
Yes, in the national guides. One says prices rise 20 to 40 percent for work on two-story buildings. Another adds 10 to 25 percent for hard-to-reach repairs that may need scaffolding.
Is this what M.O.E Masonry charges?
No. These are market numbers from national cost guides, not our price list. We look at the job, or you send photos, and we put the quote in writing. Call or text (262) 744-4688.
Request a Quote

Get In Touch With M.O.E Masonry

Tell us about the job and where it is, and send photos if you have them. Call or text (262) 744-4688, or use the form, and we will get back to you.

  • Call or text (262) 744-4688
  • Mount Pleasant, WI · serving Racine County, Kenosha County and the south side of Milwaukee County
  • Written quotes · brick, block and stone, new work and repairs

Request a Quote

Tell us about the wall, chimney, foundation or steps and where the job is. We look at it and put the quote in writing.

Call (262) 744-4688